Product ID : 357
Paint protection film for bicycleContents
Syncshield BASIC SHEET 1set (60mm×270mm 1sheet、30mm×25mm 2sheet、30mm×210mm 1sheet)
Added to Cart
* You can order either domestic or international products, but not both.
Origin | Japan |
List Price | 4,800 Yen |
No of Use | 1 |
Cost per car | 4,800 Yen |
PPF (Paint Protection Film) has been installed mainly for the purpose of protecting the surface of automobiles, preventing discoloration, and preventing scratches.
This product Syncshield is a PPF (paint protection film) jointly developed by several Japanese film-related manufacturers and SENSHA as a new flagship product of the SENSHA brand. It is a very reliable product currently used in about 800 stores in 34 countries all over the world.
The material used for the Syncshield is TPU (thermoplastic polyurethane). This material has excellent weather resistance, elasticity and flexibility.
Scratch Resistant Performance
The strong 150μm polyurethane film protects your bicycle from external damage such as scratches and rubbing.
Fading Prevention Performance
Not only the polyurethane film, but also the coating layer and adhesive layer have the ability to block UV rays and protect your bicycle from fading.
Self-healing Performance
Since the Syncshield has the function of self-healing the film itself, it is possible to almost prevent the occurrence of small scratches. If it is a slight scratch such as a slight rubbing, it will repair itself.
Antifouling performance
The coating layer applied to the surface of the polyurethane film has the effect of preventing the sticking of mud and dirt that adheres daily.
Water Repellency
Syncshield has excellent water repellency. The result of water contact angle test was 110°
Transparency
It has been developed with a high degree of transparency so as not to spoil the color texture of the bicycle itself. Even after the application, you won't notice that the film is glued on
Non-yellowing performance
It has been developed with a high degree of transparency so as not to spoil the color texture of the bicycle itself. Even after the application, you won't notice that the film is glued on
Flexibility
It was developed to follow complicated cubic curved surfaces without difficulty. Achieves high work ability.
The set contents of this product are [・ 60mm × 270mm 1 sheet ・ 30mm × 25mm 2 sheets ・ 30mm × 210mm 1 sheet].
Feel free to use it on the chain stay or wire hits, or where other scratches are likely to occur.
At each SENSHA Bicycle store, which specializes in bicycles and coatings nationwide, we apply protection films on a daily basis. The protection film used there is this product Sycnshield.
With the support of many customers, we have constructed many bicycles. Please give it a try!
1) The Syncshield has 3 layers at the time of shipment. Peel off the protective film with the round sticker on it.
2) Decide where you want to attach the Sycnshield, please clean and degrees it in advance.
3) Cut the Syncshield according to the place you want to attach, such as the chain stay or down tube. At this point, it is a good idea to cut the corners slightly round.
4) Spray plenty of our Exclusive Synshield Construction Liquid on the adhesive surface of the Syncshield and the painted surface of the frame.
5) Stick this film gently on the place where you want to attach the Synshield.
6) Use your finger or Rubber Squeegee (hard / small) to carefully push out the water remaining in the gap between the Syncshield and the frame so that no air bubbles remain.
7) After pasting, gently wipe off the water on the surface to check the finish. When the adhesive surface of the Syncshield dries, the adhesive strength increases and it sticks firmly.
※ When constructing, be sure to use the dedicated syncshield construction liquid. If you use a liquid other than the special construction liquid, we cannot guarantee the product.