FELT BUFF 10T×150mm
Product ID : 250
Buff for glass surfaceContents
-
International4,067 YenNo.
Added to Cart
* You can order either domestic or international products, but not both.
| Origin | Japan |
| List Price | 4,067 Yen |
| No of Use | 100 |
| Cost per car | 41 Yen |
FELT BUFF
Feature and benefits
A "dedicated" buff for polishing glass surfaces
It is used by attaching it to a cordless power polisher to polish the window glass surface.
We also paid particular attention to the material to prevent the abrasive from soaking into the buff.
By using it in combination with the oil film remover "OILY FILM CLEAN" and the glass abrasive "GLASS POLISH", the condition of the glass surface can be adjusted.
It is also ideal for the base treatment of the water-repellent coating agent "WINDOW CRYSTAL".
Please use it to refresh the glass surface.
・The FELT BUFF is a "glass surface only" buff. Do not use it for anything other than glass.
・Please use the body buff for the body.
・Rough glass surfaces may need to be polished over and over again, depending on the condition.
Even if you use a cordless power polisher, it is not something that can be "immediately removed", so think of it as "polishing until it can be removed".
・When polishing, be sure to wash the car and use it on a clean glass surface.
Polishing from above sand, dust, etc. may cause scratches.
So you can polish confidently and safely
Protection of parts around the glass!
When polishing the glass, it is recommended to cure the area around the glass with "MASKING TAPE".
Rubber and resin parts are attached around the glass, and you can protect the parts from friction caused by polishing by applying masking tape to these parts.
Why is masking tape necessary?
The rubber and resin parts around the glass are very delicate depending on the model, so rubbing with a compound (abrasive) may leave marks.
In order to prevent such troubles and proceed with the work efficiently, it is very effective to cure in advance with "MASKING TAPE".
Eight types with different thicknesses are available!
Use 8 types of "MASKING TAPE" according to the size of the parts to be protected.
Ideal for curing large areas such as headlights and bumpers.
It is convenient for curing emblems and door moldings.
A must-have item for curing narrow gaps such as between panels.
It is best to wash each time after using the FELT BUFF.
1.After using "FELT BUFF", it is difficult to remove it by washing it once, so first flush it with tap water to some extent.
※The method for cleaning WOOL BUFF(middle), URETHANE BUFF (FINE) and URETHANE BUFF (SOFT) is different from FELT BUFF.
2. Weaken the momentum of the water and rub it with your thumb to bring out the components of the solvent and let it flow.
3. Just like when washing a car, put about 13 to 25 ml of "Body Clean" in a bucket and whisk with a strong stream of 2 liters.
4. Put "FELT BUFF" in a bucket and let "BODY CLEAN" blend in well, then wash your hands.
5. Again, use weak tap water to thoroughly wash away the residual components of the abrasive and cleaning agent to dehydrate them.
6. Dry it in the shade in a well-ventilated place and store it after it is completely dry.
We are loved by the world
Our quality is proven in about 34 countries around the world and around 800 branches.
Our products have been used regularly at approximately 800 stores in 34 countries around the world, including Asia, Europe, the Middle East, and Africa.
In Japan, our products are used by car washes, gas stations, and a variety of other automobile-related companies.